Pre-order · Ships August 5th

PhoneSoap Baby: The UV Baby Bottle Sanitizer & Dryer

$149.95 ✓ Free shipping

.

A UV baby bottle sanitizer and dryer in one sealed chamber — kills 99.9% of bacteria† on bottles, pump parts and pacifiers, then dries them with warm air. No water, no steam, no chemicals.

  • Sanitizes and dries in one sealed stainless-steel chamber
  • Fits bottles, breast-pump parts, pacifiers, teethers & more
  • UV-C light sanitizing — no water tanks, tablets or descaling

Ships August 5th. Your order is charged today.

Why your baby's bottles need this ↓
Free standard
shipping
30-day money-
back guarantee
1-yr warranty +
UV-C lamp
3,000,000+Sanitizers sold
10+ yearsOf UV-C sanitizing
99.9%†Of bacteria killed
As seen onShark Tank · WSJ · CNN · Forbes
Why daily sanitizing matters

Your baby's bottles are growing bacteria.

Even after washing, milk residue and moisture linger in bottle threads, valves and nipple folds — and damp drying racks let bacteria multiply. The CDC recommends sanitizing baby bottles daily.

How UV-C sanitizing works →

Hidden Bacteria Growth

Milk residue can remain in threads, valves and hard-to-reach crevices.

Bottle Brushes Aren't Enough

Washing removes visible residue but doesn't sanitize the surfaces underneath.

Damp Drying Racks

Moist environments create ideal conditions for bacteria to multiply.

Time-Consuming Routine

Preparing bottles for feeding takes valuable time.

Bacteria hiding in baby bottle threads, valves and nipples
The PhoneSoap difference

Why UV-C beats steam.

Most baby bottle sanitizers use steam — which means water tanks, drainage, descaling and wet items at the end. PhoneSoap Baby uses UV-C light and warm air instead, so bottles come out sanitized and dry, with none of the upkeep.

PhoneSoap Baby UV-C baby bottle sanitizer and dryer versus a steam sterilizer

No water or plumbing

No tank to fill, no hose to drain, no descaling routine to keep up with.

No chemicals or tablets

UV-C light does the work — nothing is left behind on the surfaces your baby uses.

Philips UV-C lamp

A genuine Philips UV-C lamp delivers consistent output cycle after cycle.

Sanitize + dry

Sanitized but still wet isn't ready.

Bacteria return fast in warm, damp places. PhoneSoap Baby sanitizes and dries in one sealed chamber, so items come out dry and ready — not sitting wet on a rack.

Bottles drying on a rack, staying damp

Rack drying

  • ×Takes hours
  • ×Items stay damp
  • ×Bacteria can return
PhoneSoap Baby sanitizing and drying bottles in a sealed chamber

PhoneSoap Baby

  • Dries in minutes
  • Sealed stainless-steel chamber
  • Ready when you need them
Lab-tested

Lab-tested to kill 99.9% of bacteria.

PhoneSoap Baby is independently tested against the real-world bacteria found on feeding surfaces — not just easy lab strains.

Staphylococcus aureusE. coliPseudomonas aeruginosaSalmonella TyphimuriumSalmonella Paratyphi AShigella flexneri

† Independently lab-tested against the bacteria listed above. Real-world results vary with item size, shape and material. PhoneSoap Baby is not a medical device.

See the full testing results →
99.9%of bacteria killed†
Sanitize + dryin one sealed chamber
No heatUV-C light, not boiling water
Chemical-freenothing left behind

Why PhoneSoap Baby

23 liters of space inside the PhoneSoap Baby chamber
Capacity

23 liters of space. Everything in one place.

The stainless-steel interior holds baby bottles up to 6.5″ tall upright, openings facing the UV-C lamp. A removable top basket adds room for pacifiers, nipples, teethers and spoons — all sanitized in one cycle.

What fits inside

Fits more than you think.

If it fits in the chamber, PhoneSoap Baby can sanitize it.

Baby bottles (up to 6.5″)Breast-pump parts & flangesPacifiers & teethersBottle nipplesSippy & straw cupsBaby spoonsToys that fit the chamberBooks
Bottles, pump parts, pacifiers and cups that fit inside PhoneSoap Baby
PhoneSoap Baby drying bottles and pump parts with warm air
Drying

Dry and ready, not just sanitized.

Every mode but one finishes with warm air. Auto, Dry and Store leave bottles and pump parts dry and ready. Sanitize runs UV-C only, with no drying or heat — this is the mode for electronics like a baby monitor, toys with batteries, or electronics.

4 ways to use it

One button for every situation.

From a quick sanitize to overnight storage, choose the mode for the moment — then let PhoneSoap Baby do the rest.

PhoneSoap Baby control panel: Auto, Sanitize, Dry and Store modes

Auto

Senses moisture and runs the right sanitize-and-dry combination.

Sanitize

UV-C only, in 11, 16 or 21-minute cycles, for items already dry or electronics.

Dry

Gently dries damp bottles and parts with filtered warm air.

Store

Keeps items sealed and re-sanitized every two hours for up to 72 hours.

A child safely loading toys into the PhoneSoap Baby chamber
Designed with parents in mind

Safe for your baby. Safe for you.

  • Lid safety sensor — UV-C stops instantly the moment the lid opens.
  • Fully sealed chamber — UV-C light stays contained inside the unit.
  • No heat or chemicals — nothing hot, nothing to rinse off after.
  • Faster than air-drying — ready between feedings, not hours later.
Trusted by the pros

The name parents trust.

PhoneSoap has led consumer UV-C sanitizing for over a decade — 3,000,000+ sanitizers sold and featured on Shark Tank, the Wall Street Journal, CNN and Forbes. Every product is independently third-party tested, because your baby deserves more than marketing claims.

PhoneSoap, trusted by parents for over a decade
How it works

Three steps. That's it.

A hands-free process that sanitizes, dries and stores your baby's feeding essentials at the push of a button.

Place bottles and pump parts inside PhoneSoap Baby
1

Place items inside

Shake off excess water. Stand bottles upright with openings toward the UV-C lamp, and drop pacifiers, nipples and teethers in the removable basket.

Close the lid and choose a PhoneSoap Baby mode
2

Close the lid, pick a mode

Auto runs a full sanitize-and-dry cycle. Sanitize runs a quick UV-C cycle. The lid sensor stops everything the moment it opens.

Bottles come out sanitized, dried and ready
3

Done, ready to use

Items come out sanitized and dry. Store mode re-sanitizes every two hours, so bottles stay ready for up to 72 hours — even at 3 a.m.

PhoneSoap Baby dimensions and technical specifications
Tech specs

Inside the specifications.

Interior capacity23 liters
Fits bottles up to6.5″ tall
Dimensions11″ × 11″ × 6.85″
Weight5 lbs
Inner tankStainless steel
UV-C lampPhilips 29V 4W (~6,000 hr)
FilterReplaceable every 6 months
Warranty1-year limited (+ UV-C lamp)
Questions, answered

Frequently asked questions

Do I really need to sanitize my baby's bottles?

Yes. The CDC recommends daily sanitizing for babies under three months, premature babies and those with weakened immune systems. Even for older babies, sanitizing after washing adds a layer of protection against bacteria that soap and water can miss — especially in the threads, nipple folds and crevices where residue hides.

Is UV-C light safe for baby bottles and pump parts?

Yes. PhoneSoap Baby uses UV-C light and warm air only — no water, steam, high heat or chemicals, so nothing is left on the surfaces your baby uses. The lid sensor shuts the UV-C off the instant the lid opens. Rinse off any visible milk residue first, then run the cycle.

How is a UV-C sanitizer different from a steam sterilizer?

Steam sterilizers boil water to make heat, which can warp softer plastics over time and leave items wet. PhoneSoap Baby uses UV-C light instead of heat and finishes with a warm-air dry — no water tank, no descaling, and items come out dry, not damp.

Does it dry the bottles too?

Yes. PhoneSoap Baby dries with filtered warm air in the same sealed chamber, so bottles, nipples and pump parts come out dry as well as sanitized — no drying rack, ready for the next feeding.

How long does a sanitizing cycle take?

Sanitize mode runs 11, 16 or 21 minutes depending on the load. Auto mode senses moisture and runs the right sanitize-and-dry combination. Store mode re-sanitizes every two hours to keep items ready for up to 72 hours.

Is PhoneSoap Baby a baby bottle sterilizer?

PhoneSoap Baby is a UV-C baby bottle sanitizer and dryer. It is independently lab-tested to kill 99.9% of common bacteria on bottles, pump parts and pacifiers, then dries them — no boiling water or steam required.

Give your baby's bottles the care they deserve.

No water. No steam. No chemicals. Just UV-C light that kills 99.9% of bacteria† and warm air that dries — from the brand parents have trusted for over a decade.

Pre-order — $149.95
Ships August 5th · Free shipping · 30-day money-back guarantee · 1-year warranty + UV-C lamp replacement
Reviews

What parents are saying

† Testing was conducted in a laboratory setting against specific bacteria (Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium, Salmonella Paratyphi A, Shigella flexneri). Real-world results may vary depending on the size, shape, and material of the item. PhoneSoap Baby is a consumer product, not a medical device, and is not intended to diagnose, treat, cure or prevent any disease. Rinse off visible residue before sanitizing.